selection. 9 10 • button to automatically delay watering for 24 hours. • If a longer Rain Delay is desired, press the [+/–] buttons to increase or decrease the setting. • Press [ENTER] or wait 10 seconds and the selected rain delay will begin. • [CLEAR] button stops the rain delay and scheduled watering will resume. • At the end of the selected rain delay amount of time, automatic watering resumes. • While in rain delay mode, the timer display will switch between the actual time and the remaining hours of the delay, every 2 seconds. Water Budgeting Water Budgeting is a simple way to adjust your watering duration to match seasonal watering needs. Water Budgeting works by increasing or decreasing watering duration for all stations in each program. Press the [PROGRAM] button to select the program you wish to budget. Adjustment range is from 10% to 200% by increments of 10%. The default value is 100%. The budgeting will remain on the adjusted range until you change it. To set budgeting: • Turn dial to [BUDGETING] • To adjust press [+/–] buttons, press [ENTER] • If using multiple programs (A, B, or C) Press the [PROGRAM]
neodymium n52button to move to the desired program and make the needed adjustment Example: Bill’s watering duration is set at 60 minutes however; it is the spring time so he wants to water half as long so he sets his budgeting to 50%, his timer will now water for 30 minutes. Manual Watering Your timer has the ability to allow you to manually water without disturbing the preset program. • Turn the dial to [AUTO]. 11 • Press the neodymium magnet n52 [MANUAL] button. Display will show A B and ALL. After a few seconds or by pressing [ENTER] the timer will begin manual watering. • All stations will water consecutively for their programmed duration.

Leave a comment

Your email address will not be published. Required fields are marked *